Top 25 Terms All Computer Students Should Know

The following basic terminologies are considered the top 25 terms all computer students should know before they even begin their studies:

1. Bit: Binary data storage unit valued at either 1 or 0.

2. Byte: Eight data bits valued between zero and 255.

3. Word: Two data bytes or 16 data bits between zero zero and 16,535.

4. CD-ROM: A storage disk with approximately 640 megabytes of capacity.

5. CD-ROM Drive: Hardware used for reading and writing to CD-ROMs.

6. Storage Media: Magnetic devices that permanently store computer data.

7. File: Permanent storage structure for data kept on a hard drive or other permanent place.

8. Virus: Unauthorized programs that infect files or send themselves via email.

9. Vulnerability: When unauthorized access can be gained due to software errors.

10. Security Flaw: When attackers gain unauthorized system access due to a software bug.

11. Worm: Unwanted programs accessing computers via application / system vulnerabilities.

12. Hardware: Physical parts of computer (case, disk drive, monitor, microprocessor, etc.).

13. Software: Programs that run on a computer system.

14. Firmware: Software that has been permanently written into a computer.

15. ISP: Internet Service Provider.

16. BIOS: The basic input / output system computers use to interface with devices.

17. MIME: Multipurpose Internet Mail Extension.

18. Boot: What happens when a computer is turned on and beginning to run.

19. Crash: When computer software errors occur and programs fail to respond.

20. Driver: Program that understands interfaced devices like printers and video cards.

21. Network: Cables and other electrical components carrying data between computers.

22. Operating System: A computer's core software component.

23. Parallel: Sending data over more than one line simultaniously.

24. Serial: Sending data over a single line one bit at a time.

25. Protocols: Communication methods and other standard Internet / networking functions.

These are the top 25 terms all computer students should know before they even begin their technical training. Most computer students know much more. In fact, everyone who uses a computer these days should understand these terms so they can be better informed about the important tool that is so integral to our daily lives.

Posted in general | Comments Off on Top 25 Terms All Computer Students Should Know

Turn Your Basement Into a Virtual Shooting Gallery

An indoor shooting simulator is easy to add on to most projection based home theater systems, and in most cases is an inexpensive way to add hours of entertainment for the whole family. People of all ages enjoy playing the wide range of games that are available for the system, everything from “Baseball Challenge” to “Elephant Hunter” will keep your family and friends entertained. Utilizing a shooting simulator is not only a great way to add excitement to your home theater room; it is also a get way to keep your shooting skills sharp.

System Basics:

There are a few basic requirements for adding a shooting simulator to an existing home theater. The simulator runs on a normal Windows based computer, software is compatible with Windows XP, Windows Vista and Windows 7. The image is broadcast through a projector to a screen, which most projectors and home theater screens will be suitable for use with this simulator. Now all you need to add is a basic simulator package, which includes a rifle, case, camera and five games. Installation of the simulator will only take about thirty minutes to setup and install the new software and hardware. Now you are ready to start enjoying the very best of simulated shooting. To recap the items you need: computer, projector, screen and a simulator package.

Benefits of Indoor Shooting:

There are many advantages to adding an indoor shooting simulator to you home theater room, these are just a few.

Convenience- having the ability to practice your shooting skills from within your own house, cuts down on drive time to the range and you can fire up your system anytime you want.

Cost Savings- ammunition is expensive! You will save a lot of money practicing your skills using a true to life replica laser firearm verses using live ammo.

Safety- using a laser firearm is a much safer weapon to practice will and it’s a lot better for your hearing.

Shooting Variety- with a shooting simulator you have the ability to practice your skills on a wide range of software titles. You can practice shooting skeet and with just a touch of a button you can switch over to another game and practice your marksmanship on simulated popup targets.

Entertainment- Gather you friends and family, challenge them for the highest score or for bragging rights.

Packages and Software:

With this system, there are many packages of both hardware and software available. Looking for a portable package or maybe a complete package if you don’t have a projector, computer and screen? Those packages and more are available. There are over 35 software titles currently available, which can be purchased separately or in 15 game packages. Software titles are being added, so you will always have the option to buy the latest games on the market. Do you have the best Halloween party on your block? There is a Halloween software package that will insure your party is unforgettable. Do you have a young hunter or marksman that could benefit from “Hunter’s Education” software? It is an option on this simulator. Teach them everything from ethical shooting to animal anatomy, with the hunter’s Ed package. Looking to hone your archery skills? This simulator has packages available for you bow enthusiasts. There are several optional firearms which can be added to the system, to maximize the skill development and enjoyment of the simulator.

Adding a shooting simulator to your theater room is easy and a cost effective way of increasing the entertainment value of your room as well as improve shooting skills. If you would like some more information on the shooting simulators or have any questions please contact me through the website.

Posted in general | Comments Off on Turn Your Basement Into a Virtual Shooting Gallery

Website Design – Hardware and Software Tools You May Need

Before you get started with your new website or editing your current site, you need to consider which hardware and software tools you may need to support your efforts.

When it comes to hardware needed this can be very simple or reasonably complex depending on your particular needs. Of course, if you plan to create a new website (or even view your new website later) you need a computer. Simple enough, right? Not necessarily. We prefer to work with Apple Macintosh (OSX Leopard on MacBook Pro) as we do a lot of intensive graphics work and have previously invested in Adobe Creative Suite software (Photoshop, InDesign, Flash, Dreamweaver, etc.). It is just as easy to create your new website using your Windows PC but we would suggest you stay away from using Windows Vista (any version) and migrate to Windows 7 or stick with Windows XP. These operating systems are just much more stable and reliable.

Another consideration for hardware should be some sort of backup hard drive or removable USB memory stick(s). It is important that you back up all of your website data to a removable drive in the event your computer crashes, is broken or is stolen. When you create website files, most of your data will be stored on the website hosting servers but, in many cases, you will have many other “builder files” that usually never make it to the hosting servers. If you lose this data you will be forced to start from scratch in many cases. Another piece of hardware that many forget about is a HD Video Camcorder. If you plan to include video on your site, you should be investing in something half decent; you can normally pick up a good video camera that also captures “still photos” for under $500.00.

When it comes to software needed, this can be somewhat more complicated, again depending on what your website design goals are. At the very least, you will need some sort of text editing software, FTP (file transfer software), graphics creation software and then a variety of other tools as you progress.

Here are some of the most common subjects you should consider when planning the design of your website product.

COMPUTER

Do you currently have a computer that can process large files (i.e. – video files) quickly and efficiently?

WEBSITE SERVER

Are you planning to host your own website portal? If so, do you know what type of hardware and server software you will need?

BACKUP HARD DRIVE or USB STICK

Do you currently have some sort of backup hard drive equipment or plan?

VIDEO CAMERA

Will you be creating custom videos for your website and, if so, do you have a HD video camera ready to go?

MOBILE WEB DEVICES

Are you planning to make your website “mobile web friendly”? If so, do you have an iPhone and an iPad? Android phone? Blackberry device? These will be needed for testing purposes!

WEBSITE CREATION SOFTWARE

Do you have any website creation software (i.e. – Adobe Dreamweaver or Microsoft Front Page) installed, licensed and ready to use?

GRAPHICS EDITING SOFTWARE

Are you planning to create your own website graphics or edit pictures? Do you have the necessary software (i.e. – Adobe Photoshop or Photo Studio)?

DATABASES

Are you planning on creating a database for your website and, if so, do you know which software to use for this purpose?

Posted in general | Comments Off on Website Design – Hardware and Software Tools You May Need

Understanding the Significance of Computer Hardware

We are living in an age that is highly influenced by technology. Most of the activities we need to do now are automatic or computerized. Of all the technological developments achieved in the recent past, one significant tool that got developed and which will certainly keep influencing our lives is the computer. You would agree that computers play a very basic role in our daily life, just like the television and the cell phone. We are already at a stage where life will be difficult without a computer. That makes it important to understand the way a computer works, and then be informed of what we should do if it stops working. The most important part of any computer is its hardware, in the absence of which it just can not function.

If you are really keen to assess what has gone wrong with your computer when it stops working, you should understand the working and constituents of its hardware. You should especially have solid knowledge about the computer hardware when you want to undertake its troubleshooting on your own. One important part of the hardware is the RAM memory of any computer. For running any program or application, any computer needs a RAM memory. Other than that, if the computer has a RAM with specifications that are not compatible with the programs it is expected to run, its operation will be slowed down and it would almost crawl. When choosing a computer, you need to ensure that its hardware is not outdated, otherwise you'll have to upgrade it in order to be able to use the intended program.

You must take certain basic precautions while handling the hardware of computers. The most essential precaution is to ensure that the power supply to your computer is switched off, else it could cause an electric shock. Then, before you touch any part within the computer, ensure that you are not carrying any electric charge by connecting to a grounded piece of metal or you may procure an anti-static mat or wrist band available in the market. While inspecting the hardware components, you should look for broken or damaged component, as these are most likely the reasons for the computer malfunction. If a component does not fit in the slot, you are probably trying to fit it in the incorrect slot.

Once you know the hardware employed in your computer and the role it plays in the functionality of your computer, you'll be in a position to undertake its troubleshooting when it malfunctions. Each piece of hardware contributes to the successful function of the computer. To a large extent, the working of a computer depends on the quality of its hardware, making it imperative to keep it in good condition.

Posted in general | Comments Off on Understanding the Significance of Computer Hardware

How Are Brains Different From Computers?

Ever wondered how brains are different from computers? This article shows how. Read on to find out.

Brains consist of cells called neurons and they connect with millions of other neurons and information gets transferred across connection gaps called synapses. Inside the cells data are processed which gives rise to an idea, concept or understanding.

Computers are built of hardware chips and the central processing unit (CPU) processes data after receiving them from the other chips. How it processes data conss of several steps but the main outline is that software programs are fed into the CPU and processed. They provide end result information depending on how the programs are furnished with data and what the query is that fed into the system. If some information is asked that is outside the scope of the software programs, the computer gets limited in functioning.

Brains, however, are limitless. From childhood until adulthood, the brain gets more and more developed and mature. It can process unknown data or abstract data as well and provide insights and knowledge.

The brain is more complex than the CPU and therefore, with neurons and synaptic connections, it is possible to process all kinds of information. It uses the five senses: touch, smell, hearing, taste and sight and takes in information and produces knowledge.

On the other hand, the CPU of computers takes in data from the typing of the keyboard and processes it, which is very limited. However, it is only human beings feeding data, writing software programs and making the computer like like a brain although not quite so.

The brain is still more intelligent than the CPU of computers and has yet to train the computer to have like the brain of a human being.

Yes, computers will be able to take over many tasks of human beings but without human beings, they are lifeless because humans have to give life to these computers, operate on them and have regular updating, monitoring and maintenance on them.

Just as a brain needs to rest and relax, computers will also need that from time to time but they can operate longer times than the average brain. While the brain sleeps, the computer can carry on with its duties of processing data and converting them to knowledge and information.

Summing up, although the CPU is sometimes called the brain of the computer, it is actually a misnomer because as I have outlined in this article, the brain is definitely different from the computer in varying ways and the brain has yet to teach the computer to Behave 100% like a brain.

Posted in general | Comments Off on How Are Brains Different From Computers?

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Computer Engineer Salary

A report by CNNmoney states that students who majored in computer engineering were the top earners of the class of 2011. On top of that according to the Bureau of Labor Statistics, the demand for computer software engineers is expected to grow by nearly 38% by 2016 You may have just stumbled upon your new career!

There are two types of engineers, hardware and software. A hardware engineer deals with physical components. They research, design, and test the physical components of a computer including circuit boards, chips, and keyboards. A software engineer, called developers, create programs for users to perform task. They create the software that translates the commands from applications into instructions that the hardware can understand. They create the operating systems and computer interfaces for desks and consumer electronics.

95% of jobs are located in metropolitan areas. Positions are located in research labs and manufacturing labs. Some work in computer system design firms, research and develop firms, or federal government. Just as there is a range of potential work environments you may end up being in, there are also a large variety of things you may be creating programs for. Computer engineers create on computers, cell phones, navigational systems in your car, video games, and etc. If you're creative, love computers, and do not mind making a lot of money in the process then this just might be for you!

Some of the highest income makers coming directly out of college are graduates in the computer engineering field. This is a great incentive to buckled down and stay focused on those late nights studying in your dorm. This will literally pay off .. BIG TIME! The average salary for computer engineer job postings nationwide are 29% higher than average salaries for all jobs nationwide. Sound good yet? Let's get into the specifics.

The overall computer engineer salary is $ 87,000. To be even more specific let's discuss what you can expect if you enter involved in hardware or software. Starting with the low end of what you can expect. As a software engineer the lowest 10% average $ 45.44 / hr or $ 57,810 annually. The highest 10% average $ 65.28 or $ 135,780. As a hardware engineer the percentages or a slight bit higher. A hardware computer engineer salary on the low end can on average expect $ 48.73 / hr or $ 62,400. The highest 10% of hardware engineers make $ 70.07 / hr or $ 147,610. Not a bad day's work!

Posted in general | Comments Off on Computer Engineer Salary

Surviving Missing Futon Frame Hardware Nightmares

There seems to be quite a few of us who have owned a futon frame and ended up losing the connecting hardware at one time or another. I myself bought a futon from the retail store I worked in for a number of years back in the early 1990s when futons were all the rage. Maybe you purchased your futon in college, purchased it from a friend or maybe made the purchase for a family room. If you're lucky to live out your life in the same house or apartment there will never be a need to move your futon except except to a different room or location. Obtaining replacement futon frame hardware involves several steps approached in order to locate exactly what you need.

In the first place do not panic just yet. Without the hardware to attach everything back together you're in some serious trouble. However there are ways to obtain what you need. At this point we could explain the many benefits of using a small bag to contain the hardware and attach it to a part of the frame with heavy packing tape so it's easily found. Who am I kidding though? I've moved mine now about three times and each time I ended up missing a bolt, a barrel nut, a nylon roller here and there. Heck, I was lucky I had all the wood components show up at each new move let alone any hardware that happened to make it as well. Besides, is not moving your home stressful enough without having to keep track of a small bag of metal hardware among a sea of ​​furniture, clothing, dishes, toys and appliances?

Pursuing this further we must calmly step back and think for a moment. Yes, we're stressed out and fuming at either our spouse or the moving company for losing the futon hardware but we need to move past that now. To be sure the futon needs our help and we're the only ones who can do it at this point. It's time for us to go through the steps of obtaining replacement hardware and there is a specific order in which we do this to obtain the fastest results. I would suggest the following steps to start tracking down replacement hardware as soon as possible.

First – identify your futon frame.
Having worked retail, it's quite possibly the toughest situation when a customer comes into the store requiring assistance but can not identify the product to the salesperson or service individual when requesting parts. Granted you're going to have to do a little research by pulling your receipt when you bought the futon from the store and identify the model or name of the futon. If you inherited the futon, found it by the side of the road or bought it at a garage sale you're in for a tough road ahead. Fear not however as the internet can be used to help you find the design and attach a name to it for use in tracking down hardware. Be aware that there are dozens of manufacturers out there using different hardware in their frames including many that have since closed their doors. Hopefully the manufacturer of your frame is still around.

Second – speak to the retailer.
Of course if you purchased your futon frame through a local retail store it's time to head down there and see if they can track down the hardware for your frame. Bring your receipt. If you do not have a receipt, then bring an image of the futon frame with you. Hopefully the salesperson or service representative is knowledgeable about the products that they've carried in the past. Best case scenario, they either can provide you with the name of the manufacturer with contact information or have the parts on hand to get you back up and running. Worst case scenario the store you purchased it is out of business or if the store is still around they have no clue about the product anymore.

Third – search online.
Supposing we've hit the worse case scenario it's time to use the web to search for the manufacturer or the name of the style of futon you have. I'd suggest using Google, Bing or Yahoo and use the name adding the word futon to the search. If you were not able to locate a name you're going to have to become a very good spotter and sift through the many images of futon frames till you find one that is very close to what you have. Identify the name of the style and the manufacturer and then proceed to locate the manufacturer of the futon frame.

Fourth – speak to the manufacturer.
Assuming the retailer did not have parts but could identify the manufacturer for you then at least have something to go on. Perhaps you were able to locate your frame style through the search engines. Again, search online using the websites previously discussed using the name of the manufacturer. You'll likely get some online retail stores off of the search. Filter them out visually until you find a link for the manufacturer. Most do have websites, locate a contact phone number or email address and contact them for information on obtaining hardware. If you're unable to locate the manufacturer's website go ahead and contact one of the many futon stores that pop-up in the search results and email them with your issue and ask if they can either sell you hardware or point you in the right direction For finding the manufacturer in hopes of tracking down hardware.

Finally – the last resort.
If you were unable to determine the name of the futon frame or the name of the manufacturer you are indeed in a tight spot. At this point your options are limited to heading down to a hardware store and seeing if you can locate some generic parts that might get you back up and running. The problem will be in the way of connecting bolts and barrel nuts and getting the right lengths if available. I would suggest taking one of the wood arms and a stretcher rail with you to the store. Begin plugging in different bolts and nuts till you find a combination that connects correctly. You'll also need to track down connecting pins, washers and clips for the seat and back section as well as the four nylon rollers that most futon frames use on the back rest. If you're lucky these may still be attached to the backrest deck making your job a bit easier.

In conclusion we've discussed the issues presented with lost futon hardware and how to go about tracking down the hardware you need. Basically identify your frame through a receipt or spotting it online. Visit the retailer store you purchased it from and obtain parts through them if they are still open. If you purchased it privately or inherited the frame track down the manufacturer using a search engine of your choice and speak to them about ordering replacements. If you are not able to locate the manufacturer but have found stores online contact one of them to see if they can sell you hardware. If all else fails visit the local hardware store with your wood futon sections in hand and begin trying bolts and nuts till you find some that work. I sincerely hope you're able to obtain the needed hardware to get your futon frame back up and running. I wish you the best of luck to you and your futon.

Posted in general | Comments Off on Surviving Missing Futon Frame Hardware Nightmares

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software